TL-WR1043ND V2.1
Moderator: Moderators
TL-WR1043ND V2.1
Installed Gargyle 1.7 on a new TL-WR1043 V2.1 and having a issue where the status screens contain no data. Plus when you try to set items on and do a save,the data is not saved.
Looks like the http://www.gargoyle-router.com/download ... actory.bin will not work with the V2.1 router.
Any ideas?
Thanks
BTW it does make the connection to the internet, so some of it works.
Looks like the http://www.gargoyle-router.com/download ... actory.bin will not work with the V2.1 router.
Any ideas?
Thanks
BTW it does make the connection to the internet, so some of it works.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: TL-WR1043ND V2.1
You need to try the OpenWRT Barrier Breaker 14.07 release
Try stock OpenWRT firmware on your router
If there are still issues, you may have a newer hardware revision
of your 2.1 router and you may need to wait for better hardware
support through OpenWRT before Gargoyle will work correctly
on your router.
Even though you have the 2.1 version, manufacturers can change
internal parts if their suppliers run out of components, or if they
can fine cheaper components elsewhere.
Try stock OpenWRT firmware on your router
If there are still issues, you may have a newer hardware revision
of your 2.1 router and you may need to wait for better hardware
support through OpenWRT before Gargoyle will work correctly
on your router.
Even though you have the 2.1 version, manufacturers can change
internal parts if their suppliers run out of components, or if they
can fine cheaper components elsewhere.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: TL-WR1043ND V2.1
was it a fresh install not an upgrade?grayzone wrote:Installed Gargyle 1.7 on a new TL-WR1043 V2.1 and having a issue where the status screens contain no data. Plus when you try to set items on and do a save,the data is not saved.
Looks like the http://www.gargoyle-router.com/download ... actory.bin will not work with the V2.1 router.
Any ideas?
Thanks
BTW it does make the connection to the internet, so some of it works.
Re: TL-WR1043ND V2.1
Thanks, will try that. It was a fresh install.
Re: TL-WR1043ND V2.1
Did you get it working?
• 2x DIR-825 B1/B2 DD-WRT r30631 • 1x DIR-825 C1 OpenWRT 15.05.1
• 4x DIR-615 D2/D4 DD-WRT r30385 • 2x DIR-505E A2 Gargoyle 1.9.1
• Cisco EPC3928S stock • Hitron BVW3653 stock • CellPipe 7130 stock
• 3COM 3CR29220 stock • Sagemcom 5310 'FunBox' stock
• 4x DIR-615 D2/D4 DD-WRT r30385 • 2x DIR-505E A2 Gargoyle 1.9.1
• Cisco EPC3928S stock • Hitron BVW3653 stock • CellPipe 7130 stock
• 3COM 3CR29220 stock • Sagemcom 5310 'FunBox' stock
Re: TL-WR1043ND V2.1
Yes, I did by installing Openwrt. Will wait and see if a newer update of Gargoyle will work.
Re: TL-WR1043ND V2.1
For those with Ver 2.1 routers --- Use Gargoyle ver 1.6.1!!
It works fine with this router.
It works fine with this router.
Re: TL-WR1043ND V2.1
i'm using ver 1.6.2 of gargoyle on this router, works OK.
Re: TL-WR1043ND V2.1
Two things:
1) I just purchased a TL-WR1043ND from this site and brought it up. The status page says:
Is this really v2.1? How can I tell?
2) I recently built the git head for this router. How safe is this to install? It sounds like there may be some problems.
I didn't see any tags for 1.7.1 so I assume it was a snapshot.
Very nice software and hardware. Thanks!
Dave
1) I just purchased a TL-WR1043ND from this site and brought it up. The status page says:
Code: Select all
Gargoyle Version: 1.6.2
Model: TP-Link TL-WR1043N/ND v2
2) I recently built the git head for this router. How safe is this to install? It sounds like there may be some problems.
Code: Select all
7077892 Jun 4 21:35 images/ar71xx/gargoyle_1.7.x-ar71xx-generic-tl-wr1043nd-v2-squashfs-sysupgrade.bin
Very nice software and hardware. Thanks!
Dave
Re: TL-WR1043ND V2.1
it's v2.1 if you look under the router unit you see the hardware and serial number of your unit.