Hello,
I'm trying to port Gargoyle to TL-WA7510N.
Via tftp i've charged on this hardware the firmware TL-WR741ND.
It works but not for the wifi chip.
During the bootup sequence, in console via serial, i've read "error code 22": wifi driver don't recognize wifi chip.
Is it possible to obtain the firmware for Bullet but for 4 MB flash (for testing)?
I've tried to change mktplinkfw.c, tp-link.mk, mach-tl-wa7510n.c, config-2.6.32, ar71xx.sh and i've obtained a firmware for TL-Wa7510n to load, but in console i've obtained error "kernel panic", the device is not on the list.
Any help?
Many thanks
TP-LINK TLWA7510N
Moderator: Moderators
Re: TP-LINK TLWA7510N
Is this yours?
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n
If it doesn't work with OpenWRT, it's not going to work with Gargoyle.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n
If it doesn't work with OpenWRT, it's not going to work with Gargoyle.
WRT54GL v1.1
Gargoyle 1.4.7
Gargoyle 1.4.7
Re: TP-LINK TLWA7510N
No. it isn't mine. i'm working for a firmware and now i'm trying to mix tl-wr741nd (working but not wifi) and bulletM.
the problem is i don't know how many files i must change.
i've put a new device in target folder for test... but is it enough???
i think no.
how many files must i change for a new device?
...this is the question....
Timmy
the problem is i don't know how many files i must change.
i've put a new device in target folder for test... but is it enough???
i think no.
how many files must i change for a new device?
...this is the question....
Timmy