HI
I want to create 3 download rules:
1 - "2M_max", 2Mbps max. BW, no min BW
2 - "1M_minA" 1Mbps min BW, no max limit
3 - "1M_minA" 1Mbps min BW, no max limit
Rule 1, "2M_max", is to share up 2Mbps for two hosts, so Host A and B will share same rule 2M_max
Rule 2 and 3 is to garantee minimum BW for that 2 hosts, at 1Mpbs
So, if one host is connected at full load, it can use up to 2Mbps, but if Host A and Host B are connected at full load, total BW will be 2Mbps, 1Mbps for each one.
Is it possible ?
2M max and 1M min BW
Moderator: Moderators
Re: 2M max and 1M min BW
Tested, It do not work.Dev_BR wrote:HI
I want to create 3 download rules:
1 - "2M_max", 2Mbps max. BW, no min BW
2 - "1M_minA" 1Mbps min BW, no max limit
3 - "1M_minA" 1Mbps min BW, no max limit
Rule 1, "2M_max", is to share up 2Mbps for two hosts, so Host A and B will share same rule 2M_max
Rule 2 and 3 is to garantee minimum BW for that 2 hosts, at 1Mpbs
So, if one host is connected at full load, it can use up to 2Mbps, but if Host A and Host B are connected at full load, total BW will be 2Mbps, 1Mbps for each one.
Is it possible ?
1 - "2M_max", 2Mbps max. BW, no min BW ->Host A and Host B
2 - "1M_minA" 1Mbps min BW, no max limit ->Host A
3 - "1M_minA" 1Mbps min BW, no max limit ->HostB
the 3 rules never work same time. I can see load at rule 1, but no load at rules 2 and 3.
Re: 2M max and 1M min BW
If you are using v1.5.4 then the one class should automatically do what you want because classes always share per IP equally.
There is no need for the other classes.
There is no need for the other classes.
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM