WRT54G V7.2 compatible with Gargoyle?

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
kobysport
Posts: 25
Joined: Fri Aug 13, 2010 9:24 pm

WRT54G V7.2 compatible with Gargoyle?

Post by kobysport »

Hi, this router Version 7.2 with Broadcom BCM5354 @ 240 MHz , RAM 8MB and fash 2MB is compatible with gargoyle ? now has installed a lite version of DD WRT, so I wanted to know, but I like gargoyle :D

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: WRT54G V7.2 compatible with Gargoyle?

Post by DoesItMatter »

Sorry for late reply

No - Gargoyle requires a minimum of 4MB of flash space and 16MB ram

Your router will have to use one of the micro versions of DD-WRT
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

kobysport
Posts: 25
Joined: Fri Aug 13, 2010 9:24 pm

Re: WRT54G V7.2 compatible with Gargoyle?

Post by kobysport »

DoesItMatter wrote:Sorry for late reply

No - Gargoyle requires a minimum of 4MB of flash space and 16MB ram

Your router will have to use one of the micro versions of DD-WRT
Thanks for the reply!
a greeting

Post Reply