Working fine one my two tl-wr1043ndhnl_dk wrote:No, I guess this is backfire SVN revision 29961.jaykumar2001 wrote:And the latest OpenWrt release is Backfire Interim Release 1 (10.03.1), right?
This includes fixes to backfire 10.03.1.
Version 1.5.3 & 1.4.6
Moderator: Moderators
Re: Version 1.5.3 & 1.4.6
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
Re: Version 1.5.3 & 1.4.6
Best build yet, thanks!
Re: Version 1.5.3 & 1.4.6
Hi!
Can I upgrade directly from v. 1.4.5 to v. 1.5.3 or just to v. 1.4.6? Anyway is it make any sence to use v. 1.5.3 instead of v. 1.4.6 on TP-Link wr-741nd?
Can I upgrade directly from v. 1.4.5 to v. 1.5.3 or just to v. 1.4.6? Anyway is it make any sence to use v. 1.5.3 instead of v. 1.4.6 on TP-Link wr-741nd?
-
- Posts: 5
- Joined: Sat Nov 05, 2011 10:28 am
Re: Version 1.5.3 & 1.4.6
Can I update directly from 1.5.0 to 1.5.3?
1043ND V8
1043ND V8
Re: Version 1.5.3 & 1.4.6
yes and no...lilspanyol wrote:Can I update directly from 1.5.0 to 1.5.3?
1043ND V8
you can update directly, but there is no guarantee that you are able to restore the configuration, if you jump updates.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
Re: Version 1.5.3 & 1.4.6
@eric,
thanks for another improved release. there is this small issue that i discovered while verifying bw distribution. see the link below as well... thanks.
http://www.gargoyle-router.com/phpbb/vi ... =12&t=2276
thanks for another improved release. there is this small issue that i discovered while verifying bw distribution. see the link below as well... thanks.
http://www.gargoyle-router.com/phpbb/vi ... =12&t=2276
1x wndr3700v4 exp. 1.9.x
1x wndr3800 exp. 1.9.x
1x wndr4300v1 exp. 1.9.x
1x wndrmacv2 exp. 1.9.x
1x wndr3800 exp. 1.9.x
1x wndr4300v1 exp. 1.9.x
1x wndrmacv2 exp. 1.9.x
Re: Version 1.5.3 & 1.4.6
kris87,
You can upgrade to either version. However, because your router has 32 mb of ram, and no usb port to install a flash drive and create swap partition on, you basically will get no added functionality compared to the 1.4.x series. I'd stick with the 1.4.x series personally if I was using your router. But do upgrade, because 1.4.6 (or 1.5.3) has fixes for Atheros wireless devices, and your router uses one.
You can upgrade to either version. However, because your router has 32 mb of ram, and no usb port to install a flash drive and create swap partition on, you basically will get no added functionality compared to the 1.4.x series. I'd stick with the 1.4.x series personally if I was using your router. But do upgrade, because 1.4.6 (or 1.5.3) has fixes for Atheros wireless devices, and your router uses one.
WRT54GL v1.1
Gargoyle 1.4.7
Gargoyle 1.4.7
Re: Version 1.5.3 & 1.4.6
Hello,
First time here. I just updated from 1.52 to 1.53 on my WNDR3700v2. Its working great! I've been very impressed with Gargoyle. My router had good signal strength before but its even better with Gargoyle. TOR runs well and is easy to use.
Thanks
First time here. I just updated from 1.52 to 1.53 on my WNDR3700v2. Its working great! I've been very impressed with Gargoyle. My router had good signal strength before but its even better with Gargoyle. TOR runs well and is easy to use.
Thanks
Re: Version 1.5.3 & 1.4.6
I have had very similar problemsjaykumar2001 wrote:Trying to upgrade my TL WR1043ND withCode: Select all
gargoyle_1.5.3-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin
using web interface, its just stuck in uploading firmware. No further action. Router reboots and I am still on firmware 1.5.2, with all my old configuration. (guess nothing happened at all)
What am I doing wrong?
Should I use the following commandline upgrade option?
1) cd /tmp
2) wget http://www.gargoyle-router.com/download ... pgrade.bin
3) md5sum gargoyle_1.5.3-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin
4) Make sure the md5sum matches the one listed on the gargoyle download page, which should be ................
5) mtd -r write gargoyle_1.5.3-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin firmware
My solution was to use failsafe to reset my router to default
-
- Posts: 7
- Joined: Mon Aug 22, 2011 1:50 am
Re: Version 1.5.3 & 1.4.6
Thanks .. my question 1.5.2 version, if the wifi under a large number of packet transmission, the system will be the reboot.Resolved in the 1.5.3 version!Really great!
http://www.gargoyle-router.com/phpbb/vi ... 100#p10632
http://www.gargoyle-router.com/phpbb/vi ... 100#p10632