TP-Link TL-WR841N/ND V7

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: TP-Link TL-WR841N/ND V7

Post by hnl_dk »

julezzth wrote:hey, nilist thank you for your guide. i tried to follow every step, but in the end after typing mtd -r write /tmp/fw.bin firmware, i got an error report (see screenshot) and now i am lost :(
i hope you can help me, i don`t know what to do now,

thx
http://img406.imageshack.us/img406/7569/winscp.jpg
Looks like you are trying to do it on your windows machine and not on the router (through ssh).
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

julezzth
Posts: 6
Joined: Fri Feb 10, 2012 9:20 am

Re: TP-Link TL-WR841N/ND V7

Post by julezzth »

but what did i wrong? i did it like in the youtube video?
- start winSCP, ip adress of router, select scp, login

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: TP-Link TL-WR841N/ND V7

Post by hnl_dk »

julezzth wrote:but what did i wrong? i did it like in the youtube video?
- start winSCP, ip adress of router, select scp, login
You should select SSH, not SCP.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

nebbia88
Posts: 53
Joined: Thu Feb 17, 2011 6:53 am

Re: TP-Link TL-WR841N/ND V7

Post by nebbia88 »

hnl_dk wrote:
julezzth wrote:but what did i wrong? i did it like in the youtube video?
- start winSCP, ip adress of router, select scp, login
You should select SSH, not SCP.
but first he has to upload copy the new firmware to /tmp with winscp, selecting SCP, right??

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: TP-Link TL-WR841N/ND V7

Post by hnl_dk »

nebbia88 wrote:
hnl_dk wrote:
julezzth wrote:but what did i wrong? i did it like in the youtube video?
- start winSCP, ip adress of router, select scp, login
You should select SSH, not SCP.
but first he has to upload copy the new firmware to /tmp with winscp, selecting SCP, right??
He does use winSCP as his SSH client (I prefer to use PuTTY directly).
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

Wild Rat
Posts: 40
Joined: Fri Feb 17, 2012 9:43 pm

Re: TP-Link TL-WR841N/ND V7

Post by Wild Rat »

Nilist wrote:OK, took the plunge and bought a TL-WR841N v7.2
As described by others, could not install the Gargoyle 1.4.5 v5 firmware through the TP-Link web interface (wrong HW version), so did the following:

1. Downloaded the latest OpenWRT build for v7 from here:
http://wiki.openwrt.org/toh/tp-link/tl-wr841nd
2. Downloaded the Gargoyle v5 factory image
3. Installed the OpenWRT firmware through the TP-Link Web UI
4. The OpenWRT came without LuCI web interface, so used PuTTY to telnet to router to set password
5. Used WinSCP to upload Gargoyle v5 factory image firmware to /tmp and rename to fw.bin
6. Opened a terminal window in WinSCP and executed

Code: Select all

mtd -r write /tmp/fw.bin firmware
(as described in reverting to original firmware in link above)

That's it! Now running Gargoyle 1.4.5 on TL-WR841 v7.2 almost without touching Linux
I successfully flashed a v.7.1 router with Gargoyle 1.5.3 using this guide.

Ivan18
Posts: 1
Joined: Sat Feb 18, 2012 4:31 pm

Re: TP-Link TL-WR841N/ND V7

Post by Ivan18 »

It's very interesting!
Smb knows, are there in Gargoyle PPTP/L2TP VPN-protocols to WAN connection :?: I didn't see it on screenshots and here

And I found this site with polish Gargoyle firmware for v7. Did smb test this?
TL-WR841N v. 7.2, fw. 3.13.7 Build 110829 Rel.55845n

julezzth
Posts: 6
Joined: Fri Feb 10, 2012 9:20 am

Re: TP-Link TL-WR841N/ND V7

Post by julezzth »

first of all thx hnl_dk, it worked and I successfully got gargoyle working on my wr841. i wanted to use it as a bridge, so i tried to config it as shown in the screenshot, but I must have done something wrong, since i cannot conncet with the router now (no valid ip-adress) - i tried to reset it, but it still does not work :( is there any way to reset the router or get access to it again? or did i brick it?
thx again for your help!!

nebbia88
Posts: 53
Joined: Thu Feb 17, 2011 6:53 am

Re: TP-Link TL-WR841N/ND V7

Post by nebbia88 »

hopefully you can enter failsafe!

http://www.gargoyle-router.com/wiki/dok ... e_recovery

see "Using Failsafe recover mode", try both reset or QSS button...

http://wiki.openwrt.org/toh/tp-link/tl- ... lsafe.mode

julezzth
Posts: 6
Joined: Fri Feb 10, 2012 9:20 am

Re: TP-Link TL-WR841N/ND V7

Post by julezzth »

thank you it worked :D

can u help me configuring the router as a bridge? i do not want to mess things up again and i did not find a proper documentation

Post Reply