can't ping TL-WR941ND

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

pesky_89
Posts: 6
Joined: Fri May 27, 2016 1:52 pm

Re: can't ping TL-WR941ND

Post by pesky_89 »

hi
yes i read it and tpl is the first command i use after power up.
othewise i couldnt even run other commands...

TFTP from server 192.168.1.169; our IP address is 192.168.1.10
Filename 'boot.bin'.
Load address: 0xa800000
Loading: T T T T T T T T T T
Retry count exceeded; starting again

i have no connectivity between my pc (192.168.1.169) and router (192.168.1.10). they cannot ping each other. this is why he cannot download the file
i really dont know how to solve this.

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: can't ping TL-WR941ND

Post by ispyisail »

Set your serial terminal at 115200 8n1. Set your computer ip address as a static one of 192.168.1.254 netmask 255.255.255.0. Install and configure a tftp server, put the firmware on it. The Windows firewall may get in the way.
ar7100> setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: can't ping TL-WR941ND

Post by ispyisail »

check firewall?

using wrong IP address?

Lantis
Moderator
Posts: 6753
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: can't ping TL-WR941ND

Post by Lantis »

Try a different machine?

You could also try for advice over at the openwrt forum which is a little more knowledgable about serial debrick.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply