CANNOT FIND MY HARDWARE

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: CANNOT FIND MY HARDWARE

Post by ispyisail »

Code: Select all

root@Gargoyle:~# cat /proc/cpuinfo
This is mine

Code: Select all

system type             : Atheros AR7161 rev 2
machine                 : Ubiquiti RouterStation Pro
processor               : 0
cpu model               : MIPS 24Kc V7.4
BogoMIPS                : 479.23
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 16
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 4, address/irw mask: [0x0000, 0x0800, 0x0000, 0x0010]
ASEs implemented        : mips16
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

root@Gargoyle:~#

niftywiz
Posts: 6
Joined: Sun Sep 29, 2013 3:44 pm

Re: CANNOT FIND MY HARDWARE

Post by niftywiz »

This is mine
Image

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: CANNOT FIND MY HARDWARE

Post by ispyisail »

don't know the answer

Its either version 1,2 or 3

have a look at these photos

http://wiki.openwrt.org/toh/tp-link/tl-wr741nd#hardware

bouwew
Posts: 30
Joined: Sat Aug 25, 2012 6:24 am

Re: CANNOT FIND MY HARDWARE

Post by bouwew »

Looking at the Openwrt Wiki page, it must be v1.x.
This one has the shielding box, and the coil on the opposite side of the board.

Post Reply