Page 1 of 1
Forgot my admin password
Posted: Tue Jul 31, 2012 8:22 pm
by dannyboy92
Hello.
I've managed to forget my admin password for my Netgear WNDR-3700v2, with the gargoyle firmware installed.
Is there any easy way to reset my router and/or password so i can get access to the web interface again?
I am a newb at the subject by the way
Re: Forgot my admin password
Posted: Tue Jul 31, 2012 11:10 pm
by ispyisail
google "openwrt failsafe"
Re: Forgot my admin password
Posted: Thu Feb 14, 2013 6:24 am
by dannyboy92
Here is what i tired:
Rebooting the WNDR-3700v2 until the light went from orange to flashing green, then pressing the reset button behind the device, making the green light flash rapidly.
I launched the tftpd64 client, set the host as 192.168.1.1 and located the gargoyle image.
When i press ''put'' i get an error 10054 in the tftp client.
Error in recv.
Error code is 10054 (An existing connection was terminated by the external host)
I did also try to change my ip to 192.168.1.1 and nothing seems to work. Also downloaded a program called recvudp wich was supposed to get me a command prompt to reset the current gargoyle so i could access the web interface, but i cannot type anything in the recvudp command prompt.
Any advices? Thanks. I really tried.
Re: Forgot my admin password
Posted: Thu Feb 14, 2013 6:56 am
by dannyboy92
I managed to find the issue myself.
I was supposed to hold down the reset button for 30seconds after booting the device, instead of pressing it when the orange light went to flashing green.
So i guess i tried to transfer the .img into failsafe mode instead of tftp mode.