OpenVPN problem

gipsonTHEone · Post by **gipsonTHEone** » Sun Jun 28, 2015 10:32 am

Hi
I have TP-Link TL-WDR4300 v1 with Gargoyle Version:1.7.1.
I try to run OpenVPN that the clinet opvn can see devices in local LAN.
Seems to be easy - couse i start server on router - check "allow clients to access hosts on Lan", create clients, download all certs and keys.
All certs and keys put in OpenVPN program install on my PC and even more my PC contect to VPN.
The problem is that i can`t see any device in local LAN. I can only ping/ eneter to router but i cant connected to other PC/ devices.
Has onyone idea what i should add (and where)?

nworbnhoj · Post by **nworbnhoj** » Sun Jun 28, 2015 5:35 pm

By chance, do you have Gargoyle - Connection - Wireless - Wireless Client Isolation Enabled ?

gipsonTHEone · Post by **gipsonTHEone** » Mon Jun 29, 2015 5:39 am

nworbnhoj wrote:By chance, do you have Gargoyle - Connection - Wireless - Wireless Client Isolation Enabled ?

Hi
no i have this option disabled.
should be enabled ?

nworbnhoj · Post by **nworbnhoj** » Mon Jun 29, 2015 7:03 am

gipsonTHEone wrote:should be enabled ?

I think that you should disable Wireless Client Isolation.

Sorry, but I do not know the solution to your VPN problem.

gshlomi · Post by **gshlomi** » Thu Jul 02, 2015 1:24 am

Got the same problem.
Any help would be appriciated

TL-WR1043ND V2, Gargoyle 1.7.1

gipsonTHEone · Post by **gipsonTHEone** » Mon Jul 06, 2015 3:26 am

gshlomi wrote:Got the same problem.
Any help would be appriciated

TL-WR1043ND V2, Gargoyle 1.7.1

So seems to be software problem/bug.
i found another problem. In firewall option forward ports.
router open port but not forwarding - i think. I use synology and i want to have access, so forward 5000 port to Synology IP. In orginal stock TP LINK software works perfectly, in gargoyle not. I check in port scaner - port is open but still i can`t connect to snology.
in free time a try another software in my router

nworbnhoj · Post by **nworbnhoj** » Mon Jul 06, 2015 3:34 pm

I think that there is something else going on here - because other people are using the VPN and port forwarding functions successfully! I do not personally use VPN but I certainly forward ports without a problem.

Perhaps you could post screen shots of your VPN setting page, port forward settings and status page - and someone here might be able to spot a config issue.

gipsonTHEone · Post by **gipsonTHEone** » Mon Jul 13, 2015 4:21 am

nworbnhoj wrote:I think that there is something else going on here - because other people are using the VPN and port forwarding functions successfully! I do not personally use VPN but I certainly forward ports without a problem.

Perhaps you could post screen shots of your VPN setting page, port forward settings and status page - and someone here might be able to spot a config issue.

Hi
Now i use VPN via Synogloy. But still i have problem to connect to synology via Intetrnet (DSM works on port 5000) . As i wrote did`t work port forwarding.
I have the same config in stock TPLINK firmware and works.

nworbnhoj · Post by **nworbnhoj** » Sat Aug 01, 2015 4:58 pm

Just a thought - have you verified that 192.168.10.101 is accepting connections on these ports? (ie from a LAN address)

Post by **ispyisail** » Sat Aug 01, 2015 10:08 pm

I use openVPN

a lot of information is missing from this post

You don't need to use port forward

screen shot of your VPN config page please

Usually subnet needs to be different at both ends e.g.
192.168.10.x
192.168.1.x

What client are you using? version?

router to router??
PC to router?
What OS?

Gargoyle Forum

OpenVPN problem

OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem

Re: OpenVPN problem